Good Manufacturer Low Cost PLC Programmable Galvanized Steel Hexagonal Wire Netting Machine
Hexagonal Wire Mesh Machine Product Information
1. Raw material of the machine is galvanized wire or pvc coated wire.
2. The wire is feeding from spools automatically.
3. The tension device is used to make the wire more straighten so the wire can feeding more easily and the mesh will be more flatten.
4. The wire will be twisted by twisted gear for hexagonal type.
5. Hexagonal wire mesh is widely used in fences of farmland and grazing land, chicken husbandry, reinforced ribs of building walls etc.
Hexagonal Wire Mesh Machine Parameter Table
||Galvanized steel wire,PVC coated wire
||1/2"; 3/4";1.2";1.5";1"; 2"; 3";4"
If your mesh size is 1/2'',it is about 60M/h
If your mesh size is 1'',it is about 100M/h
|Number of twist
4.5KW for 3.3M width machine
12KW for 4.0M width machine
13KW for 4.3m width machine
1.One set machine can only do one mesh opening.
2.We accept an special orders from any clients.
Hexagonal Wire Mesh Machine Feature
1. with fault protection,over load protection motor. If over load or power suddenly increase , the device will stop and alarm automaticly . and the screen will be displayed indicate the fault location without damage to the mechanical structure.
2. Power off protection function. The equipment in the process of running suddenly power off. The system will fun for a short time to record the location of the power outage. And then the work can be carried out smoothly without adjustment when the power is switched on .
3. Location meory function . our device can be in any action link make the device stop working without losing position , which is convenient for start or stop operation.
4. Reset recovery function can be used wen the device is confused with this function . we wrote work to restore factory settings in the system . as long as the device is adjusted to the specified position, one-key recovery, easy to adjust.