Fully automatic welded wire mesh panel welding machine in high speed
The raw material can be low-carbon steel wire, galvanized steel wire, stainless steel wire etc.
The production line consists of main mesh welding machine, electrical control cabinet, repairing machine, repairing table, bobbin machine, bobbins, bracket for longitude wires, wire pay off stand.
1,Reduce the load power and achieve energy-efficient
2,Set length and stop machine automatically
3,Automatic wire feeding and rolling
Mainly uesd for the construction mesh ,breeding mesh (rabbit cage,fox cage,mink cage etc)
1. This machine is full automatic to feed wires, weld mesh, cut edge and roll mesh.
2. The raw material is applicable for low-carbon steel wire, galvanizing wire and stainless steel.
3. It has advantages of reasonable design, low noise, stable working, easier operation etc.
4. The mesh size is precise and can be set according to customers’ requirements.
5. It adopts sealed &water cooling welding transformers, the scoria can not easily goes in.
It mainly used for the construction mesh, breeding mesh (rabbit cage, fox cage, mink cage etc.)
| Wire diameter
||1/2", 1", 1.5" ,2",2.5",3"
||1", 2", 3", 4" ,5",6"
||12.5, 25, 50mm
||25, 50, 75, 100mm
| Mesh width
||Max.1.2m, 1.5m, 2m, 2.5m
||4kw; 5.5kw, 7.5kw
| Welding speed
||2T, 2.5T, 3T, 3.5T
1 Easy operated
2 High production
3 Advanced technology electronics.
4.Separate control technology, make welding transformers working separately to reduce needed capacity.
5.Different position of button and control box with inverter (Taiwan Delta), not easily broken like before, easier to operate.
6.Sealed welding transformers, it has 8 degrees, can be adjusted for different wire diameters.
7.Square steel bottom instead of angle iron bottom. 1.5mm steel plate instead of 0.2-0.3mm steel plate, more stable.
Q: Are you the factory?
A: Yes,We are a professional wire mesh machines manufacturer. We dedicated in this
industry for 12 years. We can offer you competitive machines.
Q:Where is your factory located? How can I visit there?
A:Our factory is located in ding zhou county, hebei Province, China, about 2.5 hours by
car from Beijing .All our clients, from home or abroad, are warmly welcome to visit our
Q: What is the voltage ?
A: To ensure each machine runs well in different country and region, we will choose
different voltage like 220V 50HZ; 380V 50HZ; 415V 50HZ;440V 60HZ etc
Q: How much is your machine ?
A: The price is depended on 3 factors:wire diameter, mesh size,and mesh width.
Q: What is your payment terms?
A:Usually by T/T ( 30% in advance, 70% T/T before shipment) or 100% irrevocable L/C
at sight, or cash etc. It is negotiationable.
Q: Do your supply includes installation and debugging ?
A: Yes. We will send our best engineer to your factory for installation and debugging.
The cost will be quoted separately if you need such service.
Q: How long is your delivery time?
A: If we have in stock, delivery to Tianjin port about 5 days, No stock, it will be 30 days
after received your deposit.
Q: How can you guarantee the quality and the warranty?
A. We have an inspection team to check the products at all stages of the manufacturing
process-raw material, welding process and test the finished products, etc. 100% inspection
in assembly line to achieve the required quality levels.